The following instructions can be used to setup the OKI B721 printer to print MiScore card.
Printer Setup

  • Unwrap plastic surrounding printer.
  • Open front and top doors of  the printer.
  • Remove any additional packaging within printer.
  • Push blue lever on the drum up to the 'Locked' position.
  • Remove orange bracket with orange tape attached to it.
  • Ensure blue lever is pushed down, close top and front doors.
  • Remove any additional light blue tape on the outside of the printer.
  • Open Tray 1 (bottom tray) and insert MiScore card stock local rules end first with the outside of the card facing up. Be sure to adjust tray guides to fit snug against the card stock.
  • Close tray 1
  • Insert power cord into the back of the printer.
  • Turn on printer using the power button on the front of the printer.
Printer Menu Setup
  • Select Menu → Menus → Tray Configuration → Tray1 Config → Paper Size → *Cassette Size
  • Select Back → Media Type → *Card Stock
  • Select Back → Media Weight → *Ultra Heavy2
  • Select Back → Back → Auto Tray Switch → *Off
  • Select Back → Back → System Adjust → Power Save Time → *60 Minutes
  • Select Back → Sleep Time → *60 Minutes
  • Select Back → Back → Back → Back to return to the Ready screen.
Print Driver Download and Setup
  • Download the print driver from here: OKI B721dn Driver
  • Once downloaded select the file to begin the installation process.
  • Work through the driver installation process until you reach the printer installation process where you will be asked for a 'Network' installation or a 'Local' installation.
  • Connect the printer to the network via a network cable or connect the printer to PC via USB cable.
  Network Installation
  • Select the Network option
  • The printer will automatically search for the printer on the network.
  • Once found confirm the model of the printer as OKI B721(PCL) and select Next.
  • Printer will finalise installation.
  USB Installation
  • Select the Local option
  • Confirm the model of the printer as OKI B721(PCL) and select Next.
  • Printer will finalise installation.
Driver Configuration
  • Navigate to Devices and Printers.
  • Right click the OKI B721(PCL) printer and select Printing Preferences.
  Printing preferences                
  • Adjust the driver settings to the following options: - Size = A5 - Source = Tray 1 - Weight = Ultra Heavy2 Select Apply
  • Select Paper Feed Options
  • Deselect Auto Tray Change
  • Deselect Any Other Tray
  • Select Ok and Apply.
Paper_Feed_Options_Config                   The printer and print driver should now be setup to print scorecards. Ensure at least 100 cards are printed in a row to ascertain the print quality does not diminish and the speed of the print is consistent.
Additional Options
  • Print Darkness
The print darkness can be adjusted two ways either on the printer itself or via the print driver: Via the Printer: Select Menu → Menus → Print Adjust → Darkness (The higher the number the darker the print). Via the driver: Navigate to Devices and Printers → Right click on the printer and select Printing Preferences → Select the Job Options tab → Select Advanced → Check Printer Darkness (Move bar to the right to make the print darker).  
  • Print Alignment
The alignment of the print on the card can be adjusted on the printer. Via the Printer: Select Menu → Menus → Print Adjust → Print Position Adjust → Tray 1