MiScore Printer - Samsung M403 Installation Instructions

Modified on Fri, 17 Jun, 2022 at 10:22 AM

Unpacking Printer from box

  • Open box and discard, CD, instructions and dust flap
  • Setup up printer on desk near PC for USB or ethernet port for network connection.
  • Open front door, remove shipping packaging and take out toner and remove shipping packaging from toner 
  • Insert toner and close front door
  • Connect power cord to wall and printer, turn power on using switch at back of printer
  • On Windows 10 PC - Open Printers & Scanners from Windows start


USB Connection

  • Connect USB cable to printer and computer
  • Printer software/driver should automatically install - Samsung M03x Series


Go to Printer Preferences Setup below


Ethernet Connection


  • Connect Ethernet cable to printer


Print Network Configuration

  • Add A4 paper to Multi-Purpose Feeder
  • Select Printer button on Printer
  • Take note of IP Address in TCP/IPv4 Information
  • Remove A4 paper and close Multi-Purpose Feeder door


In Printers & Scanners select Add a Printers or Scanner

  • Printer may appear in list don't select the printer, wait for search to finish and select 'The printer that I want isn't listed' (image 1)
  • Select Add a printer using a TCP/IP address or hostname
  • Change Device Type to TCP/IP Address
  • Enter IP Address from Network Configuration printout
  • Unselect Query the printer and automatically select the driver to use
  • Select Windows Update (may take a few minutes to update printer list)
  • Select Manufacturer - Samsung
  • Select Printers - Samsung M403x Series then Next
  • Select Replace the Current Driver
  • On Type a Printer prompt select Next or Update printer name and then Next
  • Select  Next on Do not share this printer
  • Ensure Set as Default printer is ticked then Finish


Go to Printer Preferences Setup below



Printer Preferences

  • Select Printer then Manage
  • Select Set as Default
  • Select Printing Preferences
  • Select Normal Printing
  • Select Paper tab and set the following: (image 2)
    • Original Size to A5
    • Source to Tray 
  • Select Graphics Tab and set the following: (image 3)
    • Clear Text to Maximum (this is important as will print better quality, if not selected ink may rub off during a round. Especially players that don't use card cover and put in pocket)
  • Select Apply then OK


Add Scorecards to Tray 1

  • Open Tray 1 
  • Place scorecards in middle of tray
  • Bring left/right and rear guides square with scorecards
  • Don't overstack tray


Test Print

Test print a scorecard from a timesheet with a competition


Image 1Image 2
Image 3










Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article